Thank You For Your Registration AP Forum!!! We Wish You A Good Time AP Forum!!!

OBD2 Buy, OBD2, OBDII, OBD, car diagnostic, truck scanner, workshop, Chip tuning, fault code reader, IMMO


Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WinRAR v5.60 Final
WinRAR v5.60 Final
WinRAR - What's new in the latest version
  1. We updated WinRAR graphics.

     We are grateful to and
     designers participated in this endeavor and proud to announce that
     WinRAR uses the new icon set prepared by Aditya Nugraha Putra

     Previous WinRAR icons are available as interface theme here:
  2. "Repair" command efficiency is improved for recovery record protected
     RAR5 archives. Now it can detect deletions and insertions of unlimited
     size also as shuffled data including data taken from several recovery
     record protected archives and merged into a single file in arbitrary
  3. "Turn PC off when done" archiving option is changed to "When done"
     drop down list, so you can turn off, hibernate or sleep your PC
     after completing archiving.

  4. Use -ioff or -ioff1 command line switch to turn PC off,
     -ioff2 to hibernate and -ioff3 to sleep your PC after completing
     an operation.

  5. If encoding of comment file specified in -z<file> switch is not
     defined with -sc switch, RAR attempts to detect UTF-8, UTF-16LE
     and UTF-16BE encodings based on the byte order mask and data
     validity tests.

  6. WinRAR attempts to detect ANSI, OEM and UTF-8 encodings of
     ZIP archive comments automatically.
  7. "Internal viewer/Use DOS encoding" option in "Settings/Viewer"
     is replaced with "Internal viewer/Autodetect encoding".
     If "Autodetect encoding" is enabled, the internal viewer attempts
     to detect ANSI (Windows), OEM (DOS), UTF-8 and UTF-16 encodings.

  8. Normally Windows Explorer context menu contains only extraction
     commands if single archive has been right clicked. You can override
     this by specifying one or more space separated masks in "Always display
     archiving items for" option in Settings/Integration/Context menu items",
     so archiving commands are always displayed for these file types
     even if file was recognized as archive. If you wish both archiving
     and extraction commands present for all archives, place "*" here.
  9. SFX module "SetupCode" command accepts an optional integer parameter
     allowing to control mapping of setup program and SFX own error codes.
     It is also accessible as "Exit code adjustment" option
     in "Advanced SFX options/Setup" dialog.
 10. New "Show more information" WinRAR command line -im switch.
     It can be used with "t" command to issue a message also in case of
     successful archive test result. Without this switch "t" command
     completes silently if no errors are found.

     This switch is applicable only to WinRAR.exe and ignored by console

 11. If a wrong password is entered when unpacking an encrypted file
     in ZIP archive, WinRAR proposes to enter a valid password
     for same file again instead of aborting extraction.

 12. If a wrong password is entered when opening or unpacking RAR archive
     with encrypted file names, WinRAR proposes to enter a valid password
     again instead of aborting the operation. Previous versions already
     did so for RAR archives with encrypted file data, but aborted
     for archives with file name encryption.

 13. WinRAR recognizes GZIP files with arbitrary data preceding
     an actual GZIP archive, such as .scexe firmware files.

 14. @filelist parameter can be specified in "Files to add" field of
     archiving dialog. In this case WinRAR will attempt the list of archiving
     files from 'filelist' file, which should be the plain text, one file
     name per line.

 15. Info dialog:
     a) compression ratio graph is updated;

     b) "Names and data" is displayed in "Encryption" field for
        archives with encrypted file names.

 16. Full archive name is displayed if mouse pointer is placed over
     an archive name in the operation progress window. It can be useful
     if archive name is lengthy and does not fit to available window space.

 17. If -ts1 switch is used with -u or -f, file time comparison is performed
     with 1 second precision. Previosuly in such case we could wrongly treat
     an adding file as newer than archived just because we compared the high
     precision adding file time against the low precision archived file time.

 18. "Update" and "Fresh" commands ('u' and 'f' in the command line mode)
     quit immediately if no files are to be updated. Previously they created
     a temporary archive before quitting when updating archives with recovery
     record or quick open information.

 19. Prompt is issued after creating 500 volumes from WinRAR GUI shell,
     so user can continue or quit further archiving. It is done to prevent
     creating many thousands of volumes in case of wrongly entered
     volume size.

 20. WinRAR uses megabytes instead of bytes as default units for volume size
     field in the archiving dialog.

 21. "Repair" command issues "Recovery record is corrupt" message
     after repairing RAR5 archive containing a broken recovery record.
     Previously such message was issued only by "Test" command
     and "Repair" handled most of recovery record damages silently.

 22. Bugs fixed:

     a) fixed potential security issues when processing corrupt
        RAR archives;
     b) non-English characters in TAR files with PAX extended headers
        were not displayed correctly;

     c) "rar x arcname.rar .." command unpacked files to current folder
        instead of its parent;

     d) pasting files from Windows Explorer to archive opened in WinRAR
        blocked further copy and paste operations in Explorer until
        archiving was finished;

     e) SFX module issued "The specified password is incorrect" message
        infinitely not prompting for correct password once a wrong password
        was entered;

     f) folders time was always set when extracting ZIP archives even if
        "File time" options in the extraction dialog were turned off;

     g) if "Delete archive: Always" was selected when extracting
        and user pressed "Cancel" in the file overwrite or password prompt,
        an archive could be deleted even after cancelling extraction
        for .zip and .7z formats.

Attached Files
WinRAR v5.60 Final.rar
File Type: .rar
Downloaded: 83 times
Size: 7.25 KB

[Image: 2gy4oax.jpg]

Possibly Related Threads...
Thread Author Replies Views Last Post
Misubshi WinRAR 5.50 FINAL x32 x64 Tarantella 0 1,599 08-17-2017, 07:59 PM
Last Post: Tarantella
  WinRAR v5.31 (x86x64) Incl Key jahacmm 0 2,084 04-18-2016, 05:21 AM
Last Post: jahacmm
  KMSpico 10.1.1 Final + Portable dopsleutel13 4 6,734 12-01-2015, 08:07 PM
Last Post: dopsleutel13
  Windows 10 Final AIO (22 in 1) (32 Bit and 64 Bit) ISO + activator BenzHelpDesk 0 2,261 10-23-2015, 08:21 AM
Last Post: BenzHelpDesk
  DAEMON Tools Ultra v4.0.0.0423 Final jahacmm 0 3,035 08-12-2015, 03:20 AM
Last Post: jahacmm
  Revo Uninstaller Pro v3.1.2 Final jahacmm 0 2,280 07-22-2015, 03:52 PM
Last Post: jahacmm
  Reboot Restore Rx 2.0 Build 201506051353 Final dopsleutel13 0 2,379 06-09-2015, 09:58 PM
Last Post: dopsleutel13
  CyberLink PowerDVD Ultra v15.0.1510.58 Final Retail 2015 Multi jahacmm 0 2,388 05-31-2015, 08:11 AM
Last Post: jahacmm
  DAEMON Tools Ultra v3.0.0.0310 Final jahacmm 0 2,358 05-29-2015, 02:11 PM
Last Post: jahacmm
  Uninstall Tool v3.4.2 Build 5405 Final + Portable Original jahacmm 0 2,290 05-29-2015, 01:58 PM
Last Post: jahacmm

Forum Jump:

Users browsing this thread: 1 Guest(s)